D-Link DCS-935L - Page 26

26D-Link DCS-935L User Manual
Section 4 - Conguration
Icon Button Name Function
FullScreen Click to display the video from your camera at full screen.
Snapshot Click to take a snapshot of the image currently displayed
on the screen and save it to the hard drive in the folder
specied using the Storage Folder button.
Video Recording Clicktotriggerthecamera’srecordingfunction.Thiswill
record the video displayed on the screen and save it to
the hard drive in the folder specied using the Storage
Folder button.
StorageFolder Click to select a Storage Folder for saving snapshots and
video recordings to.
Listen Clickto sendthesoundsdetectedbythecamera’s
microphonetothePC’sspeakerssoyoucanlistento
the audio.
IRLEDOn/O TurnstheInfraredlightsonoro.
(Thisbuttononlyappearswhenyouenablethemanual
IR option, which can be found under the Setup > Day/
Night Mode section. Refer to “Day/NightMode”onpage
43.)
Zoom Zoomsinoroutofthepicture.Clickthebutton(1x,2x,
etc.)toadjustthelevelofdigitalzoomappliedtothe
image.
ThebuttonsdescribedinthetablebelowarelocatedatthebottomoftheLiveVideoscreen.