D-Link DFL-870

Gateway Action block
Recommended Action If the command are to be allowed change the Alg
configuration.Note: The STLS command is allways blocked!.
Revision 1
Parameters command
Context Parameters ALG Module Name
ALG Session ID
2.1.189. unknown_command_blocked (ID: 00200394)
Default Severity WARNING
Log Message POP3ALG: Unknown command blocked.
Explanation The client is sending unknown command. The command will be
blocked.
Gateway Action block
Recommended Action If the command are to be allowed change the Alg configuration.
Revision 1
Parameters command"
Context Parameters ALG Module Name
ALG Session ID
2.1.190. unexpected_mail_end (ID: 00200396)
Default Severity WARNING
Log Message POP3ALG: Unexpected end of mail received while parsing mail
content.
Explanation Unexpected end of mail received while parsing mail content..
Gateway Action block
Recommended Action Research if mail is not complete.
Revision 1
Parameters sender_email_address
len
retrigs
Context Parameters ALG Module Name
ALG Session ID
2.1.191. invalid_line_endings (ID: 00200397)
Chapter 2: Log Message Reference
120