2.18. DYNROUTING
These log messages refer to the DYNROUTING (Dynamic routing) category.
2.18.1. failed_to_export_route_to_ospf_process_failed_to_alloc
(ID: 01100001)
Default Severity CRITICAL
Log Message Failed to export route to OSPF process (unable to alloc export node)
Explanation Unable to export route to a OSPF process since out of memory.
Gateway Action alert
Recommended Action Check memory consumption.
Revision 1
Context Parameters Dynamic Route
Rule Name
Route
2.18.2. route_exported_to_ospf_as (ID: 01100002)
Default Severity NOTICE
Log Message Route exported to OSPF AS
Explanation A route was just exported to a OSPF AS.
Gateway Action None
Recommended Action None.
Revision 1
Context Parameters Dynamic Route
Rule Name
Route
2.18.3. route_unexported_from_ospf_as (ID: 01100003)
Default Severity NOTICE
Log Message Route unexported from OSPF AS
Explanation A route was just unexported from a OSPF AS.
Gateway Action None
Recommended Action None.
Chapter 2: Log Message Reference
256
To Next Page
Loading...
