Default Severity ERROR
Log Message DSA signature verification for client <client> failed.
Explanation The client DSA signuature could not be verified. Closing connection.
Gateway Action close
Recommended Action None.
Revision 1
Parameters client
2.54.14. key_algo_not_supported. (ID: 04700055)
Default Severity ERROR
Log Message The authentication algorithm type <keytype> is not supported.
Client <client>
Explanation The authentication algorithm that the client uses is not supported.
Closing connection.
Gateway Action close
Recommended Action None.
Revision 1
Parameters keytype
client
2.54.15. unsupported_pubkey_algo (ID: 04700057)
Default Severity NOTICE
Log Message Public Key Authentication Algorithm <authalgo> from client
<client> not supported/enabled.
Explanation The client is trying to authenticate using a Public Key Algorithm
which is either not supported or not enabled.
Gateway Action close
Recommended Action If the algorithm is supported by unit, configure the unit to make use
of it.
Revision 1
Parameters authalgo
client
2.54.16. max_ssh_clients_reached (ID: 04700060)
Chapter 2: Log Message Reference
566
To Next Page
Loading...
