2.26. IDPUPDATE
These log messages refer to the IDPUPDATE (Intrusion Detection & Prevention Database
update) category.
2.26.1. idp_db_update_failure (ID: 01400001)
Default Severity ALERT
Log Message Update of the Intrusion Detection & Prevention database failed,
because of <reason>
Explanation The unit tried to update the Intrusion Detection & Prevention
database, but failed. The reason for this is specified in the "reason"
parameter.
Gateway Action None
Recommended Action None.
Revision 1
Parameters reason
2.26.2. idp_database_downloaded (ID: 01400002)
Default Severity NOTICE
Log Message New Intrusion Detection & Prevention database downloaded
Explanation An updated version of the Intrusion Detection & Prevention
database has been downloaded, which will now be used.
Gateway Action using_new_database
Recommended Action None.
Revision 2
2.26.3. idp_db_already_up_to_date (ID: 01400003)
Default Severity NOTICE
Log Message Intrusion Detection & Prevention database is up-to-date
Explanation The current Intrusion Detection & Prevention database is up-to-date,
and does not need to be updated.
Gateway Action None
Recommended Action None.
Revision 1
Chapter 2: Log Message Reference
302
To Next Page
Loading...
