EasyManua.ls Logo

D-Link DFL-870

D-Link DFL-870
652 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Log Message Source IP: <source_ip>, Destination IP: <dest_ip>, SPI: <spi>, Seq:
<seq>, Protocol: <protocol>, ID: <id>, Reason: <reason>.
Explanation The source or destination address/port did not match the traffic
selectors for the SA.
Gateway Action drop
Recommended Action None.
Revision 1
Parameters source_ip
dest_ip
spi
seq
protocol
id
reason
2.31.20. commit_failed (ID: 01800200)
Default Severity CRITICAL
Log Message Failed to commit IPsec configuration
Explanation Failed to commit IPsec configuration.
Gateway Action IPsec_configuration_disabled
Recommended Action Reconfigure_IPsec.
Revision 1
2.31.21. commit_succeeded (ID: 01800201)
Default Severity INFORMATIONAL
Log Message Commit succeeded - recalculating flows and reapplying routes
Explanation Succeeded to commit IPsec configuration. Flows will be recalculated
and reapplied.
Gateway Action None
Recommended Action None.
Revision 1
2.31.22. x509_init_failed (ID: 01800203)
Default Severity CRITICAL
Log Message Failed to initilaze x509 library
Chapter 2: Log Message Reference
333

Table of Contents

Other manuals for D-Link DFL-870

Related product manuals