Default Severity ERROR
Log Message Failed to create audit module.
Explanation Failed to create audit module.
Gateway Action IPsec_audit_disabled
Recommended Action None.
Revision 1
2.31.27. failed_attach_audit_module (ID: 01800208)
Default Severity ERROR
Log Message Failed to attach audit module.
Explanation Failed to attach audit module.
Gateway Action IPsec_audit_disabled
Recommended Action None.
Revision 1
2.31.28. failed_to_configure_IPsec (ID: 01800209)
Default Severity CRITICAL
Log Message Failed during configuration with error: <error_msg> for tunnel:
<tunnel>
Explanation Failed to set IPsec configuration.
Gateway Action IPsec_configuration_disabled
Recommended Action Reconfigure_IPsec.
Revision 1
Parameters error_msg
tunnel
2.31.29. failed_to_configure_IPsec (ID: 01800210)
Default Severity CRITICAL
Log Message Failed during configuration with error: <error_msg>
Explanation Failed to set IPsec configuration.
Gateway Action IPsec_configuration_disabled
Chapter 2: Log Message Reference
335
To Next Page
Loading...
