gigawrapsent
gigawraprecv
sestime
Context Parameters User Authentication
2.62.9. invalid_accounting_stop_server_response (ID:
03700009)
Default Severity WARNING
Log Message Received a RADIUS Accounting STOP response with an Identifier
mismatch. Ignoring this packet
Explanation The unit received a response with an invalid Identifier mismatch.
This can be the result of a busy network, causing accounting event
re-sends. This will be ignored.
Gateway Action ignore_packet
Recommended Action None.
Revision 2
Context Parameters User Authentication
2.62.10. no_accounting_stop_server_response (ID: 03700010)
Default Severity ALERT
Log Message Did not receive a RADIUS Accounting STOP response. User statistics
might not have been updated on the Accounting Server
Explanation The unit did not receive a response to an Accounting-Stop event
from the Accounting Server. Accounting information might not have
been propery received by the Accounting Server.
Gateway Action None
Recommended Action Verify that the RADIUS Accounting server daemon is running on the
Accounting Server.
Revision 2
Context Parameters User Authentication
2.62.11. invalid_accounting_stop_server_response (ID:
03700011)
Default Severity ALERT
Log Message Received an invalid RADIUS Accounting STOP response from RADIUS
Chapter 2: Log Message Reference
622
To Next Page
Loading...
