D-Link DFL-870

Default Severity WARNING
Log Message Did not find a matching userauth rule for this L2TP server! Tunnel ID:
<tunnelid>, Session ID: <sessionid>
Explanation The L2TP server was unsuccessful trying to find a matching userauth
rule.
Gateway Action None
Recommended Action Make sure the userauth rules are configured correctly.
Revision 1
Parameters tunnelid
sessionid
2.37.13. l2tp_session_request (ID: 02800015)
Default Severity NOTICE
Log Message L2TP session request received. Tunnel ID: <tunnelid>
Explanation A new session request was received on the specified tunnel.
Gateway Action None
Recommended Action None.
Revision 1
Parameters tunnelid
2.37.14. l2tp_session_up (ID: 02800016)
Default Severity NOTICE
Log Message L2TP session up. Tunnel ID: <tunnelid>, Session ID: <sessionid>,
User: <user>, Auth: <auth>, MPPE: <mppe>, Assigned IP:
<assigned_ip>
Explanation The L2TP session negotiation has completed successfully.
Gateway Action None
Recommended Action None.
Revision 1
Parameters tunnelid
sessionid
user
auth
mppe
assigned_ip
Chapter 2: Log Message Reference
461