D-Link DFL-870

Gateway Action none
Recommended Action Unblock or change the corresponding fan.
Revision 1
Parameters index
name
unit
current_fanrpm
min_limit
max_limit
2.23.6. fanrpm_normal (ID: 04000032)
Default Severity WARNING
Log Message Fan RPM monitor <index> (<name>) is outside the specified limit.
Current value is <current_fanrpm> <unit>, lower limit is
<min_limit>, upper limit is <max_limit>
Explanation The sensor reports that the fan rpm value is back in the normal
range.
Gateway Action None
Recommended Action None.
Revision 1
Parameters index
name
unit
current_fanrpm
min_limit
max_limit
2.23.7. gpio_alarm (ID: 04000041)
Default Severity WARNING
Log Message GPIO monitor <index> (<name>) is outside the specified limit.
Current value is <current_gpio> <unit>, value is <current_gpio>
<unit>, lower limit is <min_limit>, upper limit is <max_limit>
Explanation This varies depending on hardware model and what the GPIO is
connected to.
Gateway Action none
Recommended Action Depends on what the GPIO is connected to.
Revision 1
Parameters index
name
Chapter 2: Log Message Reference
287