Default Severity NOTICE
Log Message Hardware acceleration of modexp calculation failed due to <msg>.
Explanation The failed calculation will be made in software instead. Hardware
acceleration can fail due to valid reasons like a full request queue. A
lot of these logs during a short timeframe could indicate issues with
hardware acceleration.
Gateway Action None
Recommended Action Verify that the gateway is not in a overloaded state. If it's not
overloaded and a lot of these logs is generated, contact the support
and report this issue.
Revision 1
Parameters msg
2.31.221. rsa-crt_accel_failed (ID: 01803401)
Default Severity NOTICE
Log Message Hardware acceleration of RSA-CRT calculation failed. <msg>
Explanation The failed calculation will be made in software instead. Hardware
acceleration can fail due to valid reasons like a full request queue. A
lot of these logs during a short timeframe could indicate issues with
hardware acceleration.
Gateway Action None
Recommended Action Verify that the gateway is not in a overloaded state. If it's not
overloaded and a lot of these logs is generated, contact the support
and report this issue.
Revision 1
Parameters msg
2.31.222. eap_authentication_failed (ID: 01803500)
Default Severity WARNING
Log Message EAP Authentication failed (<errorcode>).
Explanation Client failed EAP authentication.
Gateway Action ike_negotiation_aborted
Recommended Action None.
Revision 1
Parameters errorcode
Chapter 2: Log Message Reference
395
To Next Page
Loading...
