D-Link DFL-870

Default Severity ERROR
Log Message Eapstate/Phase1 not available
Explanation No Eapstate/Phase1 to get eap identity from.
Gateway Action None
Recommended Action None.
Revision 1
2.31.83. IDi_used_as_eap_id (ID: 01800612)
Default Severity INFORMATIONAL
Log Message IKEv2 IDi will be used as EAP identity
Explanation IKEv2 IDi will be used as EAP identity.
Gateway Action None
Recommended Action None.
Revision 1
2.31.84. no_eap_identity (ID: 01800613)
Default Severity ERROR
Log Message No EAP identity established
Explanation No EAP identity established.
Gateway Action eap_authentication_will_fail
Recommended Action None.
Revision 1
2.31.85. attach_of_eap_radius_server_failed (ID: 01800630)
Default Severity INFORMATIONAL
Log Message Failed to attach up EAP RADIUS server. Internal error code: <error>
Explanation Failed to attach EAP RADIUS server.
Gateway Action radius_server_not_attached
Recommended Action None.
Revision 1
Chapter 2: Log Message Reference
352