Default Severity WARNING
Log Message <logcnt> log messages lost due to log buffer exhaustion
Explanation Due to extensive logging, a number of log messages was not sent.
Gateway Action None
Recommended Action Examine why the unit sent such a large amount of log messages. If
this is normal activity, the "LogSendPerSec" setting might be set too
low.
Revision 1
Parameters logcnt
2.56.17. ssl_encryption_failed (ID: 03200450)
Default Severity ERROR
Log Message Encryption failed.
Explanation Encryption failed due to error. Connection closed.
Gateway Action None
Recommended Action None.
Revision 1
2.56.18. bidir_fail (ID: 03200600)
Default Severity CRITICAL
Log Message Failed to establish bi-directional communication with peer in
<timeout> seconds
Explanation The unit failed to establish a connection back to peer, using the new
configuration. It will try to revert to the previous configuration file.
Gateway Action None
Recommended Action Verify that the new configuration file does not contain errors that
would cause bi-directional communication failure.
Revision 2
Parameters localcfgver
remotecfgver
timeout
2.56.19. file_open_failed (ID: 03200602)
Chapter 2: Log Message Reference
578
To Next Page
Loading...
