D-Link DFL-870

Default Severity DEBUG
Log Message SIPALG: SIP-ALG callleg state updated
Explanation The SIP-ALG callleg state updated to [callleg_state] state.
Gateway Action allow
Recommended Action None.
Revision 2
Parameters callleg_state
from_uri
to_uri
srcip
srcport
destip
destport
Context Parameters ALG Module Name
2.1.262. failed_to_modify_sat_request (ID: 00200561)
Default Severity ERROR
Log Message SIPALG: Failed to modify the SAT request
Explanation Failed to modify requst ip to SAT destination IP in the [method]
request.
Gateway Action drop
Recommended Action None.
Revision 1
Parameters method
from_uri
to_uri
srcip
srcport
destip
destport
Context Parameters ALG Module Name
2.1.263. max_pptp_sessions_reached (ID: 00200601)
Default Severity WARNING
Log Message PPTPALG: Maximum number of PPTP sessions (<max_sessions>) for
service reached. Closing connection
Explanation The maximum number of concurrent PPTP sessions has been
Chapter 2: Log Message Reference
150