2.62. USERAUTH
These log messages refer to the USERAUTH (User authentication (e.g. RADIUS) events)
category.
2.62.1. accounting_start (ID: 03700001)
Default Severity INFORMATIONAL
Log Message Successfully received RADIUS Accounting START response from
RADIUS Accounting server
Explanation The unit received a valid response to an Accounting-Start event
from the Accounting Server.
Gateway Action None
Recommended Action None.
Revision 2
Context Parameters User Authentication
2.62.2. invalid_accounting_start_server_response (ID:
03700002)
Default Severity WARNING
Log Message Received a RADIUS Accounting START response with an Identifier
mismatch. Ignoring this packet
Explanation The unit received a response with an invalid Identifier mismatch.
This can be the result of a busy network, causing accounting event
re-sends. This will be ignored.
Gateway Action ignore_packet
Recommended Action None.
Revision 2
Context Parameters User Authentication
2.62.3. no_accounting_start_server_response (ID: 03700003)
Default Severity ALERT
Log Message Did not receive a RADIUS Accounting START response. Accounting
has been disabled
Explanation The unit did not receive a response to an Accounting-Start event
from the Accounting Server. Accounting features will be disabled.
Chapter 2: Log Message Reference
619
To Next Page
Loading...
