Accounting server. User statistics might not have been updated on
the Accounting Server
Explanation The unit received an invalid response to an Accounting-Stop event
from the Accounting Server. Accounting information might not have
been propery received by the Accounting Server.
Gateway Action None
Recommended Action Verify that the RADIUS Accounting server is properly configured.
Revision 2
Context Parameters User Authentication
2.62.12. failure_init_radius_accounting (ID: 03700012)
Default Severity ALERT
Log Message Failed to send Accounting Start to RADIUS Accounting Server.
Accounting will be disabled
Explanation The unit failed to send an Accounting-Start event to the Accounting
Server. Accounting features will be disabled.
Gateway Action accounting_disabled
Recommended Action None.
Revision 2
Context Parameters User Authentication
2.62.13. invalid_accounting_start_request (ID: 03700013)
Default Severity WARNING
Log Message Logging out the authenticated user, as a RADIUS Accounting START
request could not be sent to the RADIUS Accounting server
Explanation The authenticated user is logged out as an Accounting-Start request
did not get sent to the Accounting Server. This could be a result of
missing a route from the unit to the Accounting Server.
Gateway Action logout_user
Recommended Action Verify that a route exists from the unit to the RADIUS Accounting
server, and that it is properly configured.
Revision 2
Context Parameters User Authentication
2.62.14. no_accounting_start_server_response (ID: 03700014)
Chapter 2: Log Message Reference
623
To Next Page
Loading...
