Log Message The maximum number of policy rules reached
Explanation The maximum number of policy rules reached.
Gateway Action VPN_configuration_disabled
Recommended Action Review the advanced setting IPsecMaxRules.
Revision 2
2.31.140. input_traffic_selector_corrupt (ID: 01802111)
Default Severity ERROR
Log Message Input traffic selector is corrupt. Cannot parse input traffic selector
Explanation No authentication method is specified for the tunnel.
Gateway Action VPN_tunnel_disabled
Recommended Action Reconfigure_IPsec.
Revision 1
2.31.141. input_traffic_selector_corrupt (ID: 01802112)
Default Severity ERROR
Log Message Input traffic selector contains more than the built in maximum
number of items
Explanation Input traffic selector contains more than the built in maximum
number of items: IPSEC_MAX_RULE_TRAFFIC_SELECTORS_ITEMS.
Gateway Action VPN_tunnel_disabled
Recommended Action Reconfigure_IPsec.
Revision 1
2.31.142. invalid_traffic_selectors (ID: 01802113)
Default Severity ERROR
Log Message Specified traffic selectors for the rule's are invalid
Explanation Invalid traffic selectors are configured for tunnel.
Gateway Action VPN_tunnel_disabled
Recommended Action Reconfigure_IPsec.
Revision 1
Chapter 2: Log Message Reference
371
To Next Page
Loading...
