Gateway Action exclude_link
Recommended Action Verify that the link is operational and connected to a properly
configured LACP system.
Revision 1
Parameters physiface
laiface
2.38.4. lacp_partner_mismatch (ID: 07700004)
Default Severity ERROR
Log Message The information exchanged with the partner system on <physiface>
does not match that of other configured Members of the <laiface>
aggregation.
Explanation LACP has successfully exchanged information on several links but
the exchanged information is not identical on all of those links. LACP
has selected the best set of those links for aggregation and the rest
have been excluded. This event is generated for each of the
excluded links.
Gateway Action exclude_link
Recommended Action Verify that all configured Member interfaces are physically
connected to the same properly configured system.
Revision 1
Parameters physiface
laiface
2.38.5. lacp_link_speed_mismatch (ID: 07700005)
Default Severity ERROR
Log Message <physiface> is not compatible with other Members of the <laiface>
aggregation because they are not operating at the same link speed.
Explanation All of the configured Member interfaces are not operating at the
same link speed. LACP has selected the best set of those links for
aggregation and the rest have been excluded. This event is
generated for each of the excluded links.
Gateway Action exclude_link
Recommended Action Look for hardware or configuration limitations that may be
preventing the affected link from operating at the same link speed
as the other configured Members.
Revision 1
Parameters physiface
laiface
Chapter 2: Log Message Reference
467
To Next Page
Loading...
