D-Link DSL-2740M - Page 45

41D-Link DSL-2740M User Manual
Section 3 - Conguration
LAN Setup (continued)
DHCP6 Server: Enable or Disable the DHCP6 server.
DHCP6 Mode: Select either Auto or Manual address assignment.
If you select Manual, congure your DHCP6 address assignment settings:
Prex/Length: Enter your ULA prex.
Preferred Lifetime: Enter the preferred IPv6 address lifetime.
ValidLifetime: Enter the valid IPv6 address lifetime.
Primary DNS: Enter the primary DNS server address.
Second DNS: Enter the secondary DNS server address.
Click Save Settings to have your changes take eect.
DHCPV6