D-Link DSL-2740M - Windows 10

79D-Link DSL-2740M User Manual
Section 4 - Connecting to a Wireless Network
When connecting to the DSL-2740M wirelessly for the rst time, you will need to input the wireless network name (SSID) and Wi-Fi password
(security key) of the device you are connecting to. If your product has a Wi-Fi conguration card, you can nd the default network name and Wi-Fi
password on it. Otherwise, refer to the product label for the default Wi-Fi network SSID and password, or enter the Wi-Fi credentials set during the
product conguration.
To join an existing network, locate the wireless network icon in the taskbar next to the time
display and click on it.
Wireless Icon
Clicking on this icon will display a list of wireless networks which are within range of your
computer. Select the desired network by clicking on the SSID.
Windows® 10