D-Link DSL-2740M User Manual

35D-Link DSL-2740M User Manual
Section 3 - Conguration
Manual Wireless Network Setup
WIRELESS SETTINGSWireless Setup
SETUP
Enable Wireless: Check this box to enable the wireless network.
Wireless Network
Name (SSID):
The wireless network name for your network. To change your SSID,
enter a new name and click Apply Settings. Remember to update
the settings on your devices.
Enable Auto
Channel Scan:
Check this box to enable the router to automatically find the
optimal channel.
Wireless Channel: Select the channel number for your wireless network to operate
on. These options are region-dependent.
802.11 Mode: Select the wireless standards to use on your network. The options
are B, G, B/G, N, G/N, or B/G/N.
Hide Wireless
Network.
Visible networks conveniently advertise their existence to devices
looking for Wi-Fi networks to join. Invisible, or hidden, networks
do not. To join an invisible network, users must manually input its
SSID. Note: Making a network Hidden is not a form of security.
This page allows you to manually congure the router’s wireless connectivity settings.
WIRELESS NETWORK SETTINGS
Security Mode: Select the type of security you wish to use. The available options
are WPA-Personal, WEP, and None. Using WPA-Personal is
recommended.
For WPA-Personal, refer to WPA-Personal on page 36.
For WEP, refer to WEP on page 37.
For None, refer to None on page 38.
WIRELESS SECURITY MODE

D-Link DSL-2740M Specifications

Ports & Interfaces

RJ-11 ADSL port	1
RJ-45 Ethernet ports	4
Wireless Interface	IEEE 802.11n/g/b

Wireless Specifications

Wireless Bandwidth Rate IEEE 802.11b	11, 5.5, 2, and 1 Mbps
Wireless Bandwidth Rate IEEE 802.11g	54, 48, 36, 24, 18, 12, 9, and 6 Mbps
Wireless Bandwidth Rate IEEE 802.11n 20 MHz	150, 130, 117, 104, 78, 52, 39, 26, 13 Mbps
Wireless Bandwidth Rate IEEE 802.11n 40 MHz	300, 270, 243, 216, 162, 108, 81, 54, 27 Mbps

Operating Environment

Operating Humidity	0% to 90% non-condensing
Non-Operating Humidity	5% to 95% non-condensing
Operating Temperature	0 to 40 °C (32 to 104 °F)
Non-Operating Temperature	-20 to 65 °C (-4 to 149 °F)

Power

Input Voltage	100~240 V AC (±20%), 50/60 Hz
Output Voltage	12 V DC
Output Current	0.5 A

Weight and Dimensions

Dimensions	160 x 120 x 25 mm (6.30 x 4.72 x 0.98 inches)
Weight	205 grams (7.2 ounces)