D-Link DWR-922 - Page 24

20D-Link DWR-922 User Manual
Section 4 - Conguration
Choose this if your Internet connection automatically provides
you with an IP address. Most cable modems use this type of
connection. See Dynamic IP (DHCP) on page 8 for information
about how to congure this type of connection.
Choose this option if your Internet connection requires a
username and password to connect. Most DSL modems use this
style of connection. See PPPoE (Username / Password) on page 11
for information about how to congure this type of connection.
Choose this option if your Internet connection requires Point-
to-Point Tunneling Protocol (PPTP). See PPTP on page 13 for
information about how to congure this type of connection.
Choose this option if your Internet connection requires Layer 2
Tunneling Protocol (L2TP). See L2TP on page 15 for information
about how to congure this type of connection.
Choose this connection if you have installed a SIM card into the
DWR-922. See 4G LTE / 3G on page 17 for information about
how to congure this type of connection.
Choose this option if your Internet Service Provider (ISP)
provided you with IP address information that has to be manually
congured. See Static IP on page 10 for information about how to
congure this type of connection.
DHCP Connection
(Dynamic IP
Address):
Username
/ Password
Connection
(PPPoE):
Username
/ Password
Connection (PPTP):
Username
/ Password
Connection (L2TP):
3G/4G Connection:
Static IP Address
Connection:
The subsequent conguration pages will dier depending on the selection you
make on this page.
After entering the requested information,click Next to continue.
Note: If you are not sure what connection type to use or what settings
to enter, check with your Internet Service Provider (ISP).