D-Link G530 - Page 48

43D-Link G530 User Manual
Section 3 - Conguration
Advanced Settings... - Address Autoconguration Settings
Enable Automatic
IPv6 Address
Assignment:
Enable or disable the Automatic IPv6 Address Assignment
feature.
If
Enable DHCP-PD is disabled in the previous LAN IPv6 Address Settings:
Autoconguration
Type:
Select SLAAC+RDNSS, SLAAC+Stateless DHCP, or Stateful
DHCPv6.
If you select
SLAAC+RDNSS or SLAAC+Stateless DHCP as the Autoconguration Type:
Router
Advertisement
Lifetime:
Enter the router advertisement lifetime (in minutes). The
default is 30 minutes.
If you select
Stateful DHCPv6 as the Autoconguration Type:
IPv6 Address
Range (Start):
Enter the start IPv6 address for the DHCP server’s IPv6
assignment.
IPv6 Address
Range (End):
Enter the end IPv6 address for the DHCP server’s IPv6
assignment.
IPv6 Address Lifetime: Enter the IPv6 address lifetime (in minutes). The default is
10080 minutes.