D-Link xStack DES-3200 Series

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
10
1
enable stp
Used to glob
ally enable STP on the Switch.
Purpose
enabl
e stp
Syntax
This
command is used to globally enable the Spanning Tree Protocol on the Switch.
Description
Non
e.
Parameters
Only Administrator-level users
can issue this command.
Restrictions
Example usage:
To enable STP, globally, on the Switch:
DES-3200-28:4#enable stp
Command: enable stp
Success.
DES-3200-28:4#
disable stp
Used to glob
ally disable STP on the Switch.
Purpose
disa
ble stp
Syntax
This
command is used to globally disable the Spanning Tree Protocol on the Switch.
Description
Non
e.
Parameters
Only Administrator-level users
can issue this command.
Restrictions
Example usage:
To disable STP on the Switch:
DES-3200-28:4#disable stp
Command: disable stp
Success.
DES-3200-28:4#