D-Link xStack DES-3200 Series User Manual

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
10
2
config stp version
Used to glob
ally set the version of STP on the Switch.
Purpose
config
stp version [mstp | rstp | stp]
Syntax
This
command is used to choose the version of the spanning tree to be implemented on the
Switch.
Description
mstp – Sele
cting this parameter will set the Multiple Spanning Tree Protocol (MSTP) globally on
the Switch.
Parameters
rstp  Selecting this parameter will set the Rapid Spanning Tree Protocol (RSTP) globally on the
Switch.
stp  Selecting this parameter will set the Spanning Tree Protocol (STP) globally on the Switch.
Only Administrator-level users
can issue this command.
Restrictions
Example usage:
To set the Switch globally for the Multiple Spanning Tree Protocol (MSTP):
DES-3200-28:4#config stp version mstp
Command: config stp version mstp
Success.
DES-3200-28:4#

D-Link xStack DES-3200 Series Specifications

General

Managed	Yes
Layer	Layer 2
MAC Address Table Size	8K
Quality of Service (QoS)	802.1p
Security Features	ACL, 802.1X, Port Security
Jumbo Frame Support	Up to 9KB
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
Standards Compliance	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x, IEEE 802.1D, IEEE 802.1w, IEEE 802.1s, IEEE 802.1Q, IEEE 802.1p
Forwarding Rate	13.1 Mpps (48-port)