D-Link xStack DES-3200 Series

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
13
4
show 802.1p user_priority
Used to displ
ay the current mapping between an incoming packet’s 802.1p priority value
and one of the Switch’s four hardware priority queues.
Purpose
sho
w 802.1p user_priority
Syntax
This
command is used to display the current mapping of an incoming packet’s 802.1p
priority value to one of the Switch’s four hardware priority queues.
Description
Non
e.
Parameters
Non
e.
Restrictions
Example usage:
To display 802.1p user priority:
DES-3200-28:4#show 802.1p user_priority
Command: show 802.1p user_priority
QOS Class of Traffic
Priority-0 -> <Class-1>
Priority-1 -> <Class-0>
Priority-2 -> <Class-0>
Priority-3 -> <Class-1>
Priority-4 -> <Class-2>
Priority-5 -> <Class-2>
Priority-6 -> <Class-3>
Priority-7 -> <Class-3>
DES-3200-28:4#