D-Link xStack DES-3200 Series

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
13
8
show cos mapping
Used to sh
ow CoS mapping.
Purpose
sho
w cos mapping {port <portlist> }
Syntax
This
command is used to display information regarding CoS
mapping enabled ports and their mapping method.
Description
Parameters
<portlist>  Specifies a range of ports to be displayed. If no
parameter is specified, the all ports priority settings will be shown.
Non
e.
Restrictions
Example usage:
To show the CoS mapping information:
DES-3200-28:4#show cos mapping
Command: show cos mapping
Port Ethernet_priority IP_priority
---- ----------------- -----------
1 802.1p off
2 802.1p off
3 802.1p off
4 802.1p off
5 802.1p off
6 802.1p off
7 802.1p off
8 802.1p off
9 802.1p off
10 802.1p off
11 802.1p off
12 802.1p off
13 802.1p off
14 802.1p off
15 802.1p off
16 802.1p off
17 802.1p off
18 802.1p off
19 802.1p off
20 802.1p off
CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All