D-Link xStack DES-3200 Series - Page 158

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
15
3
show vlan
VLAN.
Parameters
<vlan_name 32>  The VLAN name of the VLAN for which to
display a summary of settings.
vlanid <vidlist>  Specifies a range of multiple VLAN IDs to be
displayed.
ports <portlist>  Specifies a port or range of ports that will be
displayed.
Non
e.
Restrictions
Example usage:
To display the Switch’s current VLAN settings:
DES-3200-28:4#show vlan
Command: show vlan
VID : 1 VLAN Name : default
VLAN Type : Static Advertisement : Enabled
Member Ports : 1-28
Static Ports : 1-28
Current Tagged Ports :
Current Untagged Ports : 1-28
Static Tagged Ports :
Static Untagged Ports : 1-28
Forbidden Ports :
Total Entries : 1
DES-3200-28:4#
To display the Switch’s current VLAN settings for a specific port:
DES-3200-28:4#show vlan port 1
Command: show vlan ports 1
Port 1
VLAN ID Untagged Tagged Forbidden Dynamic
------- -------- ------ --------- -------
1 X - - -
DES-3200-28:4#
show gvrp
Used to displ
ay the GVRP status for a port list on the Switch.
Purpose
sho
w gvrp {<portlist>}
Syntax
This
command is used to display the GVRP status for a port list on
the Switch.
Description
Parameters
<portlist>  Specifies a port or range of ports for which the GVRP
status is to be displayed.
Non
e.
Restrictions