D-Link xStack DES-3200 Series User Manual

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
15
2
enable gvrp
Used to ena
ble GVRP on the Switch.
Purpose
enabl
e gvrp
Syntax
This
command, along with disable gvrp below, is used to enable and
disable GVRP on the Switch, without changing the GVRP configuration
on the Switch.
Description
Non
e.
Parameters
Only Administrator-level users
can issue this command.
Restrictions
Example usage:
To enable the generic VLAN Registration Protocol (GVRP):
DES-3200-28:4#enable gvrp
Command: enable gvrp
Success.
DES-3200-28:4#
disable gvrp
Used to disab
le GVRP on the Switch.
Purpose
disa
ble gvrp
Syntax
This
command, along with enable gvrp, is used to enable and disable
GVRP on the Switch, without changing the GVRP configuration on
the Switch.
Description
Non
e.
Parameters
Only Administrator-level users
can issue this command.
Restrictions
Example usage:
To disable the Generic VLAN Registration Protocol (GVRP):
DES-3200-28:4#disable gvrp
Command: disable gvrp
Success.
DES-3200-28:4#
show vlan
Used to displ
ay the current VLAN configuration on the Switch
Purpose
sho
w vlan [<vlan_name 32> | vlanid <vidlist> | ports <portlist> ]
Syntax
This
command is used to display summary information about each
VLAN including the VLAN ID, VLAN name, VLAN Type, the
Tagging/Untagging status, and the Member/Non-
member/Forbidden status of each port that is a member of the
Description

D-Link xStack DES-3200 Series Specifications

General

Managed	Yes
Layer	Layer 2
MAC Address Table Size	8K
Quality of Service (QoS)	802.1p
Security Features	ACL, 802.1X, Port Security
Jumbo Frame Support	Up to 9KB
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
Standards Compliance	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x, IEEE 802.1D, IEEE 802.1w, IEEE 802.1s, IEEE 802.1Q, IEEE 802.1p
Forwarding Rate	13.1 Mpps (48-port)