D-Link xStack DES-3200 Series - Page 166

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
16
1
show lacp_ports
Used to displ
ay current LACP port mode settings.
Purpose
s
how lacp_ports {<portlist>}
Syntax
This
command is used to display the LACP mode settings as they are
currently configured.
Description
Parameters
<portlist>  Specifies a port or range of ports to be configured.
If no parameter is specified, the system will display the current LACP
status for all ports.
Non
e.
Restrictions
Example usage:
To display LACP port mode settings:
DES-3200-28:4#show lacp_ports 1-10
Command: show lacp_ports 1-10
Port Activity
------ --------
1 Active
2 Active
3 Active
4 Active
5 Active
6 Active
7 Active
8 Active
9 Active
10 Active
DES-3200-28:4#