xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
17
4
Example usage:
To show IGMP snooping:
DES-3200-28:4#show igmp_snooping
Command: show igmp_snooping
IGMP Snooping Global State : Disabled
Multicast Router Only : Disabled
Data Driven Learning Max Entries : 56
VLAN Name : default
Query Interval : 125
Max Response Time : 10
Robustness Value : 2
Last Member Query Interval : 1
Querier State : Disabled
Querier Role : Non-Querier
Querier IP : 0.0.0.0
Querier Expiry Time : 0 secs
State : Disabled
Fast Leave : Disabled
Version : 3
Data Driven Learning Aged Out : Disabled
Total Entries : 1
DES-3200-28:4#
show router_ports
Used to displ
ay the currently configured router ports on the Switch.
Purpose
sho
w router_ports {[vlan <vlan_name 32> | vlanid <vidlist>] } {[static |
dynamic | forbidden]}
Syntax
This
command is used to display the router ports currently configured
on the Switch.
Description
Parameters
<vlan_name 32> The name of the VLAN on which the router port
resides.
<vidlist> The VID range of the router ports to be displayed.
static Displays router ports that have been statically configured.
dynamic Displays router ports that have been dynamically
configured.
forbidden Displays forbidden router ports that have been statically
configured.
Non
e.
Restrictions
To Next Page
Loading...
Need help?
General
