D-Link xStack DES-3200 Series - Page 180

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
17
5
Example usage:
To display the router ports.
DES-3200-28:4#show router_ports
Command: show router_ports
VLAN Name : default
Static Router Port :
Dynamic Router Port:
Forbidden Router Port:
Total Entries: 1
DES-3200-28:4#
show igmp_snooping group
Used to displ
ay the current IGMP snooping group configuration on
the Switch.
Purpose
sho
w igmp_snooping group {[vlan <vlan_name 32> | vlanid
<vidlist>]} {data_driven}
Syntax
This
command will display the current IGMP snooping group
configuration on the Switch.
Description
Parameters
<vlan_name 32>  The name of the VLAN for which to view IGMP
snooping group information.
<vidlist>  The VID list for which to view IGMP snooping group
information.
data_driven  Display the data driven groups.
Non
e.
Restrictions
Example usage:
To view the current IGMP snooping group:
DES-3200-28:4#show igmp_snooping group
Command: show igmp_snooping group
Source/Group : NULL/239.255.255.255
VLAN Name/VID : default/1
Reports : 1
Member Ports : 4
Router Ports : 8
Up time : 122
Expire Time : 260
Filter Mode : EXCLUDE
Total Entries : 1
DES-3200-28:4#