D-Link xStack DES-3200 Series User Manual

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
20
3
Example usage:
To configure the configurations for a previously created 802.1X Guest VLAN:
DES-3200-28:4#show 802.1x guest_vlan
Command: show 802.1x guest_vlan
Guest VLAN Settings
-----------------------------------------------------------
Guest VLAN : Tiberius
Enable Guest VLAN Ports: 1-5
DES-3200-28:4#
delete 802.1x guest_vlan
Used to delet
e a 802.1X Guest VLAN.
Purpose
delete 80
2.1x guest_vlan {<vlan_name 32>}
Syntax
This
command is used to delete an 802.1X Guest VLAN. Guest
802.1X VLAN clients are those who have not been authorized for
802.1X or they haven’t yet installed the necessary 802.1X software,
yet would still like to have limited access rights on the Switch.
Description
Parameters
<vlan_name 32>  Enter the VLAN name of the Guest 802.1X VLAN
to be deleted.
Only Administrator-level users
can issue this command.
Restrictions
Users must have already previously created a VLAN using the create
vlan command. Only one VLAN can be set as the 802.1X Guest
VLAN.
Example usage:
To delete a previously created 802.1X Guest VLAN.
DES-3200-28:4#delete 802.1x guest_vlan Tiberius
Command: delete 802.1x guest_vlan Tiberius
Success.
DES-3200-28:4#

D-Link xStack DES-3200 Series Specifications

General

Managed	Yes
Layer	Layer 2
MAC Address Table Size	8K
Quality of Service (QoS)	802.1p
Security Features	ACL, 802.1X, Port Security
Jumbo Frame Support	Up to 9KB
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
Standards Compliance	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x, IEEE 802.1D, IEEE 802.1w, IEEE 802.1s, IEEE 802.1Q, IEEE 802.1p
Forwarding Rate	13.1 Mpps (48-port)