D-Link xStack DES-3200 Series - Page 209

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
20
4
show acct_client
Used to displ
ay the current RADIUS accounting client.
Purpose
sho
w acct_client
Syntax
This
command is used to display the current RADIUS accounting
client currently configured on the Switch.
Description
Non
e.
Parameters
Non
e.
Restrictions
Example usage:
To view the current RADIUS accounting client:
DES-3200-28:4#show acct_client
Command: show acct_client
radiusAcctClient ==>
radiusAcctClientInvalidServerAddresses 0
radiusAcctClientIdentifier D-Link
radiusAuthServerEntry ==>
radiusAccServerIndex : 1
radiusAccServerAddress 10.53.13.199
radiusAccClientServerPortNumber 1813
radiusAccClientRoundTripTime 0
radiusAccClientRequests 0
radiusAccClientRetransmissions 0
radiusAccClientResponses 0
radiusAccClientMalformedResponses 0
radiusAccClientBadAuthenticators 0
radiusAccClientPendingRequests 0
radiusAccClientTimeouts 0
radiusAccClientUnknownTypes 0
radiusAccClientPacketsDropped 0
CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All