D-Link xStack DES-3200 Series - Page 210

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
20
5
show auth_client
Used to displ
ay the current RADIUS authentication client.
Purpose
sho
w auth_client
Syntax
This
command is used to display the current RADIUS
authentication client currently configured on the Switch.
Description
Non
e.
Parameters
Non
e.
Restrictions
Example usage:
To view the current RADIUS authentication client:
DES-3200-28F:4#show auth_client
Command: show auth_client
radiusAuthClient ==>
radiusAuthClientInvalidServerAddresses 0
radiusAuthClientIdentifier D-Link
radiusAuthServerEntry ==>
radiusAuthServerIndex :1
radiusAuthServerAddress 0.0.0.0
radiusAuthClientServerPortNumber 0
radiusAuthClientRoundTripTime 0
radiusAuthClientAccessRequests 0
radiusAuthClientAccessRetransmissions 0
radiusAuthClientAccessAccepts 0
radiusAuthClientAccessRejects 0
radiusAuthClientAccessChallenges 0
radiusAuthClientMalformedAccessResponses 0
radiusAuthClientBadAuthenticators 0
radiusAuthClientPendingRequests 0
radiusAuthClientTimeouts 0
radiusAuthClientUnknownTypes 0
radiusAuthClientPacketsDropped 0
CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All