D-Link xStack DES-3200 Series User Manual

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
20
6
show auth_diagnostics
Used to displ
ay the current authentication diagnostics.
Purpose
sho
w auth_diagnostics {ports [<portlist>}
Syntax
This
command is used to display the current authentication diagnostics
of the Switch on a per port basis.
Description
Parameters
ports <portlist>  Specifies a range of ports.
Non
e.
Restrictions
Example usage:
To display the current authentication diagnostics for port 1:
DES-3200-28:4#show auth_diagnostics ports 1
Command: show auth_diagnostics ports 1
Port number : 1
MAC address: 00-00-07-5D-60-02
EntersConnecting 3
EapLogoffsWhileConnecting 0
EntersAuthenticating 2
SuccessWhileAuthenticating 2
TimeoutsWhileAuthenticating 0
FailWhileAuthenticating 0
ReauthsWhileAuthenticating 0
EapStartsWhileAuthenticating 0
EapLogoffWhileAuthenticating 0
ReauthsWhileAuthenticated 0
EapStartsWhileAuthenticated 1
EapLogoffWhileAuthenticated 0
BackendResponses 4
BackendAccessChallenges 2
BackendOtherRequestsToSupplicant 0
BackendNonNakResponsesFromSupplicant 2
BackendAuthSuccesses 2
BackendAuthFails 0
CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All

D-Link xStack DES-3200 Series Specifications

General

Managed	Yes
Layer	Layer 2
MAC Address Table Size	8K
Quality of Service (QoS)	802.1p
Security Features	ACL, 802.1X, Port Security
Jumbo Frame Support	Up to 9KB
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
Standards Compliance	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x, IEEE 802.1D, IEEE 802.1w, IEEE 802.1s, IEEE 802.1Q, IEEE 802.1p
Forwarding Rate	13.1 Mpps (48-port)