D-Link xStack DES-3200 Series - Page 212

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
20
7
show auth_session_statistics
Used to displ
ay the current authentication session statistics.
Purpose
sho
w auth_session_statistics {ports <portlist | all>}
Syntax
This
command is used to display the current authentication session
statistics of the Switch on a per port basis.
Description
Parameters
ports <portlist>  Specifies a range of ports.
all – Specifies that all ports will be viewed.
Non
e.
Restrictions
Example usage:
To display the current authentication session statistics for port 16:
DES-3200-28:4#show auth_session_statistics ports 1
Command: show auth_session_statistics ports 1
Port number : 1
MAC address: 00-00-07-5D-60-02
SessionOctetsRx 7808
SessionOctetsTx 469102741
SessionFramesRx 122
SessionFramesTx 4196211
SessionId ether1_2-1
SessionAuthenticMethod Remote Authentication Server
SessionTime 70803
SessionTerminateCause NotTerminatedYet
SessionUserName 456
CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All
show auth_statistics
Used to displ
ay the current authentication statistics.
Purpose
s
how auth_statistics {ports <portlist>}
Syntax
This
command is used to display the current authentication statistics of
the Switch on a per port basis.
Description
Parameters
ports <portlist>  Specifies a range of ports.
Non
e.
Restrictions