D-Link xStack DES-3200 Series - show switch

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
16
show switch
Used to displ
ay general information about the Switch.
Purpose
s
how switch
Syntax
This
command is used to display information about the Switch.
Description
Non
e.
Parameters
Non
e.
Restrictions
Example usage:
To display the Switch’s information:
DES-3200-28F:4#show switch
Command: show switch
Device Type : DES-3200-28F Fast Ethernet Switch
MAC Address : 00-00-01-02-03-04
IP Address : 10.76.97.4 (Manual)
VLAN Name : default
Subnet Mask : 255.0.0.0
Default Gateway : 10.1.1.254
Boot PROM Version : Build 1.00.B003
Firmware Version : Build 1.20.B010
Hardware Version : A1
System Name :
System Location :
System Uptime : 0 days, 5 hours, 16 minutes, 26 seconds
System Contact :
Spanning Tree : Disabled
GVRP : Disabled
IGMP Snooping : Disabled
VLAN Trunk : Disabled
802.1X : Disabled
Telnet : Enabled (TCP 23)
Web : Enabled (TCP 80)
RMON : Disabled
SSH : Disabled
SSL : Disabled
CLI Paging : Enabled
Syslog Global State : Disabled
Dual Image : Supported
Password Encryption Status : Disabled
DES-3200-28F:4#