D-Link xStack DES-3200 Series

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
17
show serial_port
Used to displ
ay the current serial port settings.
Purpose
sho
w serial_port
Syntax
This
command is used to display the current serial port settings.
Description
Non
e.
Parameters
Non
e
Restrictions
Example usage:
To display the serial port setting:
DES-3200-28:4#show serial_port
Command: show serial_port
Baud Rate : 9600
Data Bits : 8
Parity Bits : None
Stop Bits : 1
Auto-Logout : 10 mins
DES-3200-28:4#