xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
22
4
Example usage:
To configure CPU access list entry:
DES-3200-28:4#config cpu access
ip
20.2.2.3 destination_ip 10.1.1.252 dscp 3 icmp type 11 code 32 port all deny
Success.
DES-3200-28:4#
delete cpu access_profile
Used to delet
e a previously created CPU access profile.
Purpose
delete cpu a
ccess_profile profile_id <value 1-3>
Syntax
This
command is used to delete a previously created CPU access profile.
Description
Parameters
profile_id <value 1-3> Enter an integer between 1 and 3 that is used to
identify the CPU access profile to be deleted with this command. This value
is assigned to the access profile when it is created with the create cpu
access_profile command.
Only Administrator-level users
can issue this command.
Restrictions
Example usage:
To delete the CPU access profile with a profile ID of 1:
DES-3200-28:4#delete cpu access_profile profile_id 1
Command: delete cpu access_profile profile_id 1
Success.
DES-3200-28:4#
show cpu access_profile
Used to view
the CPU access profile entry currently set in the Switch.
Purpose
sho
w cpu access_profile profile_id <value 1-3>
Syntax
This
command is used view the current CPU interface filtering entries set on
the Switch.
Description
Parameters
profile_id <value 1-3> Enter an integer between 1 and 3 that is used to
identify the CPU access profile to be deleted with this command. This value
is assigned to the access profile when it is created with the create cpu
access_profile command.
Non
e.
Restrictions
Example usage:
To show the CPU filtering state on the Switch: