D-Link xStack DES-3200 Series User Manual

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
23
4
DES-3200-28:4#config sntp primary 10.1.1.1 secondary 10.1.1.2 poll-interval
30
Command: config sntp primary 10.1.1.1 secondary 10.1.1.2 poll-interval 30
Success.
DES-3200-28:4#
show sntp
Used to displ
ay the SNTP information.
Purpose
s
how sntp
Syntax
This
command is used to display SNTP settings information
including the source IP address, time and poll interval.
Description
Non
e.
Parameters
Non
e.
Restrictions
Example usage:
To display SNTP configuration information:
DES-3200-28:4#show sntp
Command: show sntp
Current Time Source : System Clock
SNTP : Disabled
SNTP Primary Server : 10.1.1.1
SNTP Secondary Server : 10.1.1.2
SNTP Poll Interval : 30 sec
DES-3200-28:4#
enable sntp
To enabl
e SNTP server support.
Purpose
enabl
e sntp
Syntax
This
command is used to enable SNTP support. SNTP service must
be separately configured (see config sntp). Enabling and configuring
SNTP support will override any manually configured system time
settings.
Description
Non
e.
Parameters
Only Administrator-level users can i
ssue this command. SNTP
settings must be configured for SNTP to function (config sntp).
Restrictions
Example usage:
To enable the SNTP function:

D-Link xStack DES-3200 Series Specifications

General

Managed	Yes
Layer	Layer 2
MAC Address Table Size	8K
Quality of Service (QoS)	802.1p
Security Features	ACL, 802.1X, Port Security
Jumbo Frame Support	Up to 9KB
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
Standards Compliance	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x, IEEE 802.1D, IEEE 802.1w, IEEE 802.1s, IEEE 802.1Q, IEEE 802.1p
Forwarding Rate	13.1 Mpps (48-port)