D-Link xStack DES-3200 Series User Manual

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
23
5
DES-3200-28:4#enable sntp
Command: enable sntp
Success.
DES-3200-28:4#
disable sntp
To disa
ble SNTP server support.
Purpose
disa
ble sntp
Syntax
This
command is used to disable SNTP support. SNTP service must
be separately configured (see config sntp).
Description
Non
e.
Parameters
Only Administrator-level users
can issue this command.
Restrictions
Example usage:
To disable SNTP support:
DES-3200-28:4#disable sntp
Command: disable sntp
Success.
DES-3200-28:4#
config time
Used to man
ually configure system time and date settings.
Purpose
c
onfig time <date ddmmmyyyy> <time hh:mm:ss>
Syntax
This
command is used to configure the system time and date
settings. These will be overridden if SNTP is configured and
enabled.
Description
date – Expre
ss the date using two numerical characters for the day
of the month, three alphabetical characters for the name of the
month, and four numerical characters for the year. For example:
03aug2003.
Parameters
time – Express the system time using the format hh:mm:ss, that is,
two numerical characters each for the hour using a 24-hour clock,
the minute and second. For example: 19:42:30.
Only Administrator-level users
can issue this command. Manually
configured system time and date settings are overridden if SNTP
support is enabled.
Restrictions

D-Link xStack DES-3200 Series Specifications

General

Managed	Yes
Layer	Layer 2
MAC Address Table Size	8K
Quality of Service (QoS)	802.1p
Security Features	ACL, 802.1X, Port Security
Jumbo Frame Support	Up to 9KB
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
Standards Compliance	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x, IEEE 802.1D, IEEE 802.1w, IEEE 802.1s, IEEE 802.1Q, IEEE 802.1p
Forwarding Rate	13.1 Mpps (48-port)