D-Link xStack DES-3200 Series User Manual

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
23
8
DES-3200-28:4#config dst repeating s
_
week 2 s
_
day tue s
_
mth 4 s
_
time
15:00 e_week 2 e_day wed e_mth 10 e_time 15:30 offset 30
Command: config dst repeating s
_
week 2 s
_
day tue s
_
mth 4 s
_
time 15:00
e_week 2 e_day wed e_mth 10 e_time 15:30 offset 30
Success.
DES-3200-28:4#
show time
Used to displ
ay the current time settings and status.
Purpose
s
how time
Syntax
This
command is used to display system time and date
configuration as well as display current system time.
Description
Non
e.
Parameters
Non
e.
Restrictions
Example usage:
To display the time currently set on the Switch’s System clock:
DES-3200-28:4#show time
Command: show time
Current Time Source : System Clock
Current Time : 1 Days 01:39:17
Time Zone : GMT +02:30
Daylight Saving Time: Repeating
Offset in minutes : 30
Repeating From : Apr 2nd Tue 15:00
To : Oct 2nd Wed 15:30
Annual From : 29 Apr 00:00
To : 12 Oct 00:00
DES-3200-28:4#

D-Link xStack DES-3200 Series Specifications

General

Managed	Yes
Layer	Layer 2
MAC Address Table Size	8K
Quality of Service (QoS)	802.1p
Security Features	ACL, 802.1X, Port Security
Jumbo Frame Support	Up to 9KB
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
Standards Compliance	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x, IEEE 802.1D, IEEE 802.1w, IEEE 802.1s, IEEE 802.1Q, IEEE 802.1p
Forwarding Rate	13.1 Mpps (48-port)