xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
25
7
Command Parameters
enable admin
config admin local_enable
Each command is listed, in detail, in the following sections.
enable authen_policy
Used to ena
ble system access authentication policy.
Purpose
enabl
e authen_policy
Syntax
This
command is used to enable an administrator-defined
authentication policy for users trying to access the Switch. When
enabled, the device will check the method list and choose a technique
for user authentication upon login.
Description
Non
e.
Parameters
Only Administrator-level users
can issue this command.
Restrictions
Example usage:
To enable the system access authentication policy:
DES-3200-28:4#enable authen_policy
Command: enable authen_policy
Success.
DES-3200-28:4#
disable authen_policy
Used to disab
le system access authentication policy.
Purpose
disa
ble authen_policy
Syntax
This
command is used to disable the administrator-defined
authentication policy for users trying to access the Switch. When
disabled, the Switch will access the local user account database for
username and password verification. In addition, the Switch will now
accept the local enable password as the authentication for normal users
attempting to access administrator level privileges.
Description
Non
e.
Parameters
Only Administrator-level users
can issue this command.
Restrictions
Example usage:
To disable the system access authentication policy:
DES-3200-28:4#disable authen_policy
Command: disable authen_policy
Success.
DES-3200-28:4#
To Next Page
Loading...
Need help?
General
