D-Link xStack DES-3200 Series - Page 263

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
25
8
show authen_policy
Used to displ
ay the system access authentication policy status on
the Switch.
Purpose
sho
w authen_policy
Syntax
This
command will show the current status of the access
authentication policy on the Switch.
Description
Non
e.
Parameters
Non
e.
Restrictions
Example usage:
To display the system access authentication policy:
DES-3200-28:4#show authen_policy
Command: show authen_policy
Authentication Policy: Enabled
DES-3200-28:4#
create authen_login method_list_name
Used to creat
e a user defined method list of authentication methods
for users logging on to the Switch.
Purpose
cre
ate authen_login method_list_name <string 15>
Syntax
This
command is used to create a list for authentication techniques
for user login. The Switch can support up to eight method lists, but
one is reserved as a default and cannot be deleted. Multiple method
lists must be created and configured separately.
Description
Parameters
<string 15>  Enter an alphanumeric string of up to 15 characters to
define the given method list.
Only Administrator-level users
can issue this command.
Restrictions
Example usage:
To create the method list “Zira.”:
DES-3200-28:4#create authen_login method_list_name Zira
Command: create authen_login method_list_name Zira
Success.
DES-3200-28:4#