xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
26
7
config authen application
Only Administrator-level users
can issue this command.
Restrictions
Example usage:
To configure the default method list for the Web interface:
DES-3200-28:4#config authen application http login default
Command: config authen application http login default
Success.
DES-3200-28:4#
show authen application
Used to displ
ay authentication methods for the various applications
on the Switch.
Purpose
sho
w authen application
Syntax
This
command is used to display all of the authentication method lists
(login, enable administrator privileges) for Switch configuration
applications (console, telnet, SSH, Web) currently configured on the
Switch.
Description
Non
e.
Parameters
Non
e.
Restrictions
Example usage:
To display the login and enable method list for all applications on the Switch:
DES-3200-28:4#show authen application
Command: show authen application
Application Login Method List Enable Method List
------------- ------------------ ---------------------
Console default default
Telnet Zira default
SSH default default
HTTP default default
DES-3200-28:4#
create authen server_host
Used to creat
e an authentication server host.
Purpose
cre
ate authen server_host <ipaddr> protocol [tacacs | xtacacs | tacacs+ |
radius] {port <int 1-65535> | key [<key_string 254> | none] | timeout <int
1-255> | retransmit < 1-255>}
Syntax
This
command is used to create an authentication server host for the
TACACS/XTACACS/TACACS+/RADIUS security protocols on the Switch.
When a user attempts to access the Switch with authentication protocol
enabled, the Switch will send authentication packets to a remote
Description
To Next Page
Loading...
Need help?
General
