D-Link xStack DES-3200 Series - Page 289

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
28
4
config ssh algorithm
DSA  This parameter will enable or disable the Digital Signature
Algorithm encryption.
[enable | disable] – This allows the user to enable or disable
algorithms entered in this command, on the Switch.
Only Administrator-level users
can issue this command.
Restrictions
Usage example:
To configure SSH algorithm:
DES-3200-28:4# config ssh algorithm blowfish enable
Command: config ssh algorithm blowfish enable
Success.
DES-3200-28:4#
show ssh algorithm
Used to displ
ay the SSH algorithm setting.
Purpose
sho
w ssh algorithm
Syntax
This
command will display the current SSH algorithm setting status.
Description
Non
e.
Parameters
Non
e.
Restrictions
Usage Example:
To display SSH algorithms currently set on the Switch: