D-Link xStack DES-3200 Series

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
29
5
enable sim
Used to ena
ble Single IP Management (SIM) on the Switch.
Purpose
enabl
e sim
Syntax
This
command is used to enable SIM globally on the Switch. SIM
features and functions will not function properly unless this function
is enabled.
Description
Non
e.
Parameters
Only Administrator-level users
can issue this command.
Restrictions
Example usage:
To enable SIM on the Switch:
DES-3200-28:4#enable sim
Command: enable sim
Success.
DES-3200-28:4#
disable sim
Used to disab
le Single IP Management (SIM) on the Switch.
Purpose
disa
ble sim
Syntax
This
command is used to disable SIM globally on the Switch.
Description
Non
e.
Parameters
Only Administrator-level users
can issue this command.
Restrictions
Example usage:
To disable SIM on the Switch:
DES-3200-28:4#disable sim
Command: disable sim
Success.
DES-3200-28:4#