D-Link xStack DES-3200 Series User Manual

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
30
8
show smtp
Used to view
configured parameters for the SMTP function on the
Switch.
Purpose
sho
w smtp
Syntax
This
command is used to display parameters configured for SMTP
on the Switch, including server information, mail recipients and the
current running status of SMTP on the Switch.
Description
Non
e.
Parameters
Non
e.
Restrictions
Example usage:
To view the SMTP parameters currently configured on the Switch:
DES-3200-28:4#show smtp
Command: show smtp
smtp status: Enabled
smtp server address : 166.99.66.33
smtp server port : 25
self mail address: smtp@30XX.dev
Index Mail Receiver Address
-------- ---------------------------------
1 ctsnow@axum.com
2 clyde@knicks.com
3 administrator@dlink.com
4 dgallinari@nba.com
5
6
7
8
DES-3200-28:4#
smtp send_testmsg
Used to se
nd a test message to mail recipients configured on the
Switch.
Purpose
smtp send_te
stmsg
Syntax
This
command is used to send test messages to all mail recipients
configured on the Switch, thus testing the configurations set and
the reliability of the SMTP server.
Description
Non
e.
Parameters
Only Administrator-level users
can issue this command.
Restrictions

D-Link xStack DES-3200 Series Specifications

General

Managed	Yes
Layer	Layer 2
MAC Address Table Size	8K
Quality of Service (QoS)	802.1p
Security Features	ACL, 802.1X, Port Security
Jumbo Frame Support	Up to 9KB
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
Standards Compliance	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x, IEEE 802.1D, IEEE 802.1w, IEEE 802.1s, IEEE 802.1Q, IEEE 802.1p
Forwarding Rate	13.1 Mpps (48-port)