D-Link xStack DES-3200 Series User Manual

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
31
7
DES-3200-28:4#enable gratuitous_arp ipif System trap log
Command: enable gratuitous_arp ipif System trap log
Success.
DES-3200-28:4#
disable gratuitous_arp
Used to disab
le the gratuitous ARP trap and log.
Purpose
disa
ble gratuitous_arp {ipif <ipif_name 12>} {trap | log} (1)
Syntax
The co
mmand is used to disable the gratuitous ARP trap and log states.
The Switch can trap and log the IP conflict event to inform the
administrator. By default, the trap is disabled and event log is enabled.
Description
Parameters
<ipif_name 12>  IP interface name of the Switch.
Only Administrator-level users
can issue this command.
Restrictions
Example usage:
To disable the System’s interface gratuitous ARP log and trap:
DES-3200-28:4#disable gratuitous_arp ipif System trap log
Command: disable gratuitous_arp ipif System trap log
Success.
DES-3200-28:4#
show gratuitous_arp
Used to displ
ay the gratuitous ARP configuration.
Purpose
sho
w gratuitous_arp {ipif <ipif_name 12>}
Syntax
This
command is used to display the gratuitous ARP configuration.
Description
Parameters
<ipif_name 12>  IP interface name of the Switch.
Non
e.
Restrictions
Example usage:
To display gratuitous ARP log and trap states:

D-Link xStack DES-3200 Series Specifications

General

Managed	Yes
Layer	Layer 2
MAC Address Table Size	8K
Quality of Service (QoS)	802.1p
Security Features	ACL, 802.1X, Port Security
Jumbo Frame Support	Up to 9KB
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
Standards Compliance	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x, IEEE 802.1D, IEEE 802.1w, IEEE 802.1s, IEEE 802.1Q, IEEE 802.1p
Forwarding Rate	13.1 Mpps (48-port)